Filters
Question type

Study Flashcards

 Why should a power supply be rated about 30 percent higher than expected needs?

Correct Answer

verifed

verified

Power supplies that run at less than pea...

View Answer

 Three long beeps during the POST sequence on an Intel BIOS are an indication of what type of issue?


A) motherboard problem
B) memory error
C) system overheat
D) keyboard controller problem

E) A) and D)
F) B) and C)

Correct Answer

verifed

verified

 What are three things you can do to solve an overheating problem?

Correct Answer

verifed

verified

1. If the system refuses to boot or hang...

View Answer

 When testing a laptop power connector, how close should the voltage measured be to the accepted voltage of the laptop?


A) +/- 10%
B) +/- 5%
C) +/- 1%
D) The voltage should be exactly the same

E) C) and D)
F) B) and D)

Correct Answer

verifed

verified

 Why might you disable quick booting features in BIOS when you are troubleshooting a problem?


A) to enable access the advanced boot menu
B) quick booting prevents Windows from logging errors
C) to see a full POST report
D) quick booting bypasses the POST

E) A) and B)
F) C) and D)

Correct Answer

verifed

verified

 A PCIe 6/8 pin connector for providing auxiliary power to PCIe cards utilizes what voltage?


A) +5v
B) -12V
C) +12v
D) +15v

E) A) and C)
F) None of the above

Correct Answer

verifed

verified

 If you see an error message that reads "Processor thermal trip error", what is the likely problem?


A) the power supply is inadequate
B) the processor has overheated
C) the processor has failed
D) a memory module might be bad

E) A) and D)
F) B) and D)

Correct Answer

verifed

verified

 If you see smoke or smell burning, you should immediately open the case to try to identify the component that is causing it.

A) True
B) False

Correct Answer

verifed

verified

Matching Match each item with a statement below. - a component that fits on the bottom of a laptop that can improve charge times and increase time between charges


A)  Windows pinwheel
B)  BSOD
C)  heat sink
D)  CAG
E)  dual rail
F)  driver store
G)  UPS
H)  sheet battery
I)  lithium ion
J)  Memory Diagnostics

K) C) and G)
L) F) and J)

Correct Answer

verifed

verified

 If you are trying move a hard drive from a non-working computer to a working computer for the purposes of accessing the data on the drive, what must you have?


A) you must install the drive in a drive bay
B) you must manually assign a drive letter
C) you must have an Administrator password before you can access the data on the drive
D) the drive must be initialized before you can access it

E) A) and B)
F) B) and C)

Correct Answer

verifed

verified

Showing 41 - 50 of 50

Related Exams

Show Answer